We have this LG washer/dryer when you turn it on it gives us fault code EE minus the horizontal line on the top of the first E and beeps does not let you do anything.I looked it up on the fault codes .it tells me (water temperature trouble & unplug and get serviced)I thought it would be something with heating the water.I spoke to one repair guy he thinks it is the thermistor.What do you think.I have pulled the face of the machine off so i can see everything.
ANSWER Kon, You're getting close. Since you have the front off the machine, remove the wires from the heater terminals 5301FR1158D and check for a resistance reading of 10 to 30 ohms, this will tell you if the heater is intact. Then Remove the wire connector from the thermistor 6322FR2046C and check for a resistance of 2.5K and 180K ohms with a multi meter and make sure the thermistor hasn't backed out or loosened in the rubber heater housing. If all checks are OK, you'll need to check the wiring(especially at the terminals on the thermistor) and at the control board 6871EC2005A.
Answered by AppliancePartsPros.com | Tuesday, June 25, 2013