Note: This question is for the older version of this part, but we thought you might still find it helpful
I have installed part # AP3879224. Control panel comes on, but the elements
still do not heat up?
ANSWER Hello Mike. Make sure there is 240 volts coming to the oven. If so, you will need to test the thermal fuse 9759242, on the back of the oven, and see if it is bad. It should read closed for continuity. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Wednesday, August 31, 2011