considering re painting black with white will it work. saw answer that said first coat vertical second horizontal then third coat more critical as it is finish coat--any suggestions to making this coat look better one direction spraying same as second same as first -other suggestions/
ANSWER Joe, Make sure you wash down the unit thoroughly, you may want to use a strong chemical cleaner, like TSP, especially around the handle areas. Make sure you use a medium grit sandpaper and "rough up" or dull the original finish, then wash it all down again. Use a "tack Wrag" and wipe down the unit just before you start to paint. It doesn't matter which direction you start at (Vertical or Horizontal) but you don't want to be too close to the cabinet, and you need to move relatively quick. You want to first coats to go on more like a "powder" coat" and wait 20 to 30 minutes to allow the paint to "flash" before you start the next coat. After a few days (3 to 5) then "hand wax and polish" the finish with car polish. Just take your time and be patient, color changes can be frustrating.
Answered by AppliancePartsPros.com | Thursday, January 03, 2013