I'm getting code nd. I can hear the drain pump activated and run (drain hose vibrates) and there is no water standing in the tub. Is my problem the water pressure sensor (level sensor) or the drain pump?
ANSWER Tom, The "ND" error code, is a drain issue indicater, " The water level fails to drop below the low water level reset, withibn 15 minutes, before a spin cycle begins" . You may need the water level switch 34001324 and you should disconnect the air tube that attaches to it and blow into the tube, to clear any debris inside the tube. check and make sure its not twisted or kinked. It sounds like the drain pump is not the issue, but you do want to remove the hoses and check for possible clogs or restrictions in the hoses and pump. Thanks and Good Luck
Answered by AppliancePartsPros.com | Tuesday, November 08, 2011