What causes washer to only fill when on hot or warm cycle?
Cold water will not run in tub.
ANSWER Hello Gloria. Test for power to the cold water valve and make sure the screens are not clogged. If there is power and the screens are clear, replace the water valve on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Friday, May 03, 2013