washer is about 25 yearrs old it has been a great machine.
it has stoped spining and draining, it tries to. the moter hums and the thermal switch trips.the lid switch is working. i pulled the pump it seemed to work ok i replaced it anyway. put back to gether to change in problme. i can get it to spin and drain but have to keep cycling the spin cycl. have to wait for moter to cool. i also have a gresey coveing on the top of the shafts an in side the ajitater. could my problem be the drive tube/bearings?
ANSWER Dave, Drive tube bearings 285203, when they fail or start to fail are usually accompanied by quite a bit of noise, everything between a squealing noise to a loud thumping or grumbling noise. And the deposits on the agitator and shaft, could be from fabric softener, soil, etc. from the clothes washing process. Before dismantling the tubs and transmission, you may want to check the brake shoes and rollers 285438 and make sure there is no "drag" on the system, and suspect the timer 3946434 may be making a dual contact and causing the motor to overheat and "stall" at the start of the spin cycle.
Answered by AppliancePartsPros.com | Monday, June 17, 2013