just purchased, used, leaking from left back. Thanks.
ANSWER Tony, You may have a loose or damaged drain hose, or tub cover. You may want to remove the washer cabinet and check. You'll need to remove power to the washer, on the back of the control panel end caps there will be a phillips head screw that needs to be removed, then slide the panel towards the front and tip the console back on the hinges that secure the top of the console to the washer back panel.Unplug the lid switch harness from the switch, remove the cabinet mounting clips by placing a flat blade screw driver in the front of the clip and press down and away to release the clip. Remove the cabinet by tilting it forward and pulling it away from the washer. You now have access to all the internal hoses tubs and other parts. If you use a jumper wire in the lid switch wire harness you can run the washer with the cabinet off if needed, but you need to be careful of moving parts and wires.
Answered by AppliancePartsPros.com | Thursday, April 11, 2013