Originally dryer would not heat, drum would turn, igniter would not glow. I removed igniter applied power to the igniter, it glowed. Any suggestions as to what I should do next?
ANSWER Frank, Check the radiant / flame sensor on the buener cone, for a closed circuit at room temperature. Check all the thermostats for a closed circuit at room temperature, then check for 120 VAC to the gas valve coils, with the dryer running in a heat mode. If all checks are OK, you'll need to replace the gas valve coils. Thanks and Good Luck
Answered by AppliancePartsPros.com | Saturday, October 01, 2011