The oven elements stay on after I got the temp. I set up on the digital control.
ANSWER Hello Julio. Test the sensor and see if it reads around 1650 ohms at 350°. If not, replace the sensor. If so, replace the control board. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Monday, December 17, 2012