Control display works fine when turn on and timer works. Drum does not turn-belt and motor turn easy. I suspect control board assembly defective.
ANSWER Hello Ralph,
With the display working you should check the continuity of the thermal fuse 3392519. If the thermal fuse blows then you will have display but no motor or heat. You may also want to check the thermostats and other thermal fuses W10169881 as well. You will also check the venting from the blower wheel all the way to the outside of unit to make sure it is clear. This is the most likely cause of the thermal fuse failing. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Thursday, December 06, 2012