My water dispenser does not fuction. I tested the water valve and both solenoids have continuity and water is available (ice maker fuctions properly). I can hear the switch when you depress the lever. Could it be the board?
ANSWER David, Yes, it could be the dispenser board 2224064B but you could still have a faulty fill valve W10247725. Since you have a multimeter, disconnect the purple and white wires from the fill valve, attach the meter leads to the wires, press the water dispenser paddle and see if you have 120 VAC across the two wires, If voltage is present, you'll need the valve, if no voltage is present, check the wiring at the freezer door hinge, then the control board, and replace the assembly if alls OK.
Answered by AppliancePartsPros.com | Thursday, October 11, 2012