Note: This question is for the older version of this part, but we thought you might still find it helpful
The door on my Duet Sport would not open, upon running diagnostic check got; F-24 water temp sensor, F-01 EEPROM error and F-21 Long Drain, in this order. The water temp sensor tested at 14.3 ohms (aprox. 70 degrees according to chart in service guide, with no water in tub. My assumption was ambient air temp). I cleared the drain filter Which did not have anything substantial clogging it and insured there was no obstructions or kinks in the line. I also tested the water level sensor at 0 ohms while under air pressure. The machine has been on the same power source for 1year now. There are no substantial fluctuations in current and I've had No power interruptions Or surges to point to for the problem. Washer is still not working and still producing the same codes. What should be my next step from here?
ANSWER Dave, based on your post and the error codes you've listed, you'll want to check the air dome hose 8540294 for kinks,twists and clogs. You can disconnect the tube from the pressure switch and check it, and blow in the end of the tube, to clear any debris or deposits in the hose. Then test the water level/pressure switch circuits at the PR6 connector on the CCU, that way you're checking the switch circuits and wiring all at once. Your post indicates an issue in the water level switch or wiring to the CCU.
Answered by AppliancePartsPros.com | Thursday, April 11, 2013