The lights and digital display quit working. I replaced the control box, it worked for a couple of seconds and then lights out again. All of the connections seem ok, refrig stays cool, freezer lights and temp are ok. What's next?
ANSWER Hi Richard. Make sure the 2-pin and the 9- pin molex connectors are tightly inserted. Make sure the pins are not pushing backwards out of the connections as they are being connected. Make sure that the door switch wires are connected to the door switch itself tight . I would use a volt/ohm meter part # TJMA-DM1 to assist. you in your diagnosis. Make sure you are getting full 120 vac to the door switch from the blk/red wire to the bare ground of the upper door hinge green wire.(under the hinge cap). Make sure that the control board connections themselves are tight. Thank You.
Answered by AppliancePartsPros.com | Thursday, March 22, 2012