Note: This question is for the older version of this part, but we thought you might still find it helpful
Dryer not heating up change igniter and still no heat. What may next move?
ANSWER Hello Joe. You will need to test the thermal fuses W10480709 and the flame sensor 338906 and make sure they are good. They should read closed for continuity. Here is a link on how to use a multi-meter for the testing procedures. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Thursday, May 05, 2011