Hello I have a Amanda quite series 300 (model MDBM601AWS) and I've been reading some threads here about other people having similar problem with this washer leaving a few inches of water on the bottom of the washer after loads. So I Order a new drain pump part number (6-917641) it came today installed it and it still doing the same problem. I also checked the drain hoes if it's cloged but it's fine, so does anyone here Have Solution please help. Thanks
ANSWER Hello Toan303. Check and see if the water in the drain pipe is backing up and not allowing the dishwasher to drain out the water. If so, you will need to clean out the drain pipe. If the sink is draining fine, and is not backing up, you will need to replace the drain hose 99002652 on the unit. Before replacing the drain hose, remove it from the sink and drain the unit into a bucket and see if the water comes out strong. If not, and the pump is running, the drain hose will need to be replaced.
Answered by AppliancePartsPros.com | Wednesday, June 13, 2012