24/7 Customer Support

:

Customer Questions and Answers for Drain Pump Assembly by Whirlpool

  1. Our Price $103.93
    Compare At $124.72
    You Save $20.79
     Watch Video
    • Part Number: AP4035317
    • MFG Part Number: 25001052
    • Made by: Whirlpool
    Add to Cart

Questions & Answers

For Whirlpool Drain Pump Assembly (Part Number: AP4035317)

Answer or Comment

View all Questions

We have a problem with the washer draning water... We checked the pump and unclogged the hose and drain from tub to the pump... We did check the pump for power when we took it out,,, However where do we check the power to the pump when it is connected in the washer.... Could it be the control on the pump... Everythink else workes except the drain of the water......

Rosemarie M for Model Number MAH5500BWW

ANSWER Rosemarie, You probably have a faulty drain pump motor 25001052. There is no "control" on the drain pump, only a motor and the voltage to the motor is supplied from the machine control board 22004488. You may want to disconnect the red and white wires from the drain pump motor, insert or attach your meter leads to the wire twerminals, and select a spin/drain cycle and start the washer, If you read 120 VAC across the two wires the control board and wire harness are OK and you need the drain pump. If you don't have the voltage, you'll need to check the wires from the drain pump back up to the control board, and check Conn.P6 pin#4(red wire) for 120 VAC out of the control board, no voltage would indicate a faulty control board. 

Answered by AppliancePartsPros.com   |   Thursday, October 25, 2012

We are Safe, Secure, Dependable and Trusted
  • BizRate.com Customer Certified Site - Click to Verify