Turn on dryer and everything works, blower, drum spins after approximately 30 seconds the igniter glows hear a click and see flames and flame stays on about 4 minutes and the goes off. When next heating cycle begin igniter glows hear a click but no flames. The flame comes back on but only when completely cold.
ANSWER Hello Troye. It sounds like the coils 279834 are failing on the unit and will need to be replaced. You can test the coils using a multi-meter TJMA-DM1. The two prong coil will read 1,000-1,300 ohms, and the three prong coil will read 1,300-1,400 ohms across prongs 1&2, and 500-600 ohms across prongs 1&3. Test the coils after running the dryer for about 10 minutes. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Monday, July 01, 2013