Everything works on the dryer...except I am getting no heat...I am uncertain which part might actually be bad....I seen where I should check for the igniter to be glowing, but I do not see it....How do I determine if it is just a bad coil, or something more.
ANSWER Hello Jeff. You can test the coils and thermal cut-offs. You can test these with a multi-meter TJMA-DM1. The two prong coil will read 1,000-1,300 ohms, and the three prong coil will read 1,300-1,400 ohms across prongs 1&2, and 500-600 ohms across prongs 1&3. Also the thermal cut-offs will read closed for continuity. Hope this helps.
Answered by AppliancePartsPros.com | Thursday, March 17, 2011