How do I test the ignitor?
You can test the ignitor by doing a continuity test or an amp draw. You can also do a voltage test from terminal to ground for 120 vac. The amp draw should be between 3.2 to 3.6 amps and it should have continuity if you test continuity. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Wednesday, March 13, 2013