Ignitor glows but it takes two or more trys before it ignites.
You would check continuity on the ignitor it should show closed or resistance check should be between 50 and 500 ohms. If open then ignitor or outside ohm range then it is bad. Check your flame switch, it should read closed and if open it is bad. Check gas valves for continuity and thermal fuses and thermostats for continuity. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Wednesday, April 17, 2013