Have a Dryer that has power but no heat. I have replaced the following, Element and Fuse-THRML. I noticed the new element corals are not getting hot. What could be the problem?
ANSWER Hello Mike. Check and make sure you have 240 volts coming to the dryer. Check and make sure the unit is not set to Air Fluff. Also check the heater and thermostats and see if they are good. You can test these with a multi-meter TJMA-DM1. They should read closed for continuity. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Monday, July 15, 2013