I purchased from you and installed a new heating element on my dryer. The dryer still doesn't dry the clothes in one cycle. Could the thermal cut off be the problem? I also blew out the lint pipe. If not the thermal cut off I'm open to suggestions.
ANSWER Hello Jeff,
You could check continuity on the thermal fuse and thermal cut off to see if they are blown. If they show no continuity then they are bad and would need to be replaced. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Tuesday, January 15, 2013