Our dryer does not heat but does tumble. Could this be a bad thermal fuse? Our Whirlpool dryer is about 14 yrs old.
ANSWER Hello Mimi,
This could be caused the thermal fuse, a timer contact, the operating thermostat, the high limit thermostat, the flame sensor, or a coil on the safety valve. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Friday, August 09, 2013