The dryer will not heat in any mode and will not turn off by it's self. The dryer will continue to run. Any Ideas. Thanks
You will want to check to make sure that the igniter is coming on to light the burner. If the igniter is not coming on then check the igniter to see if there is power getting to it. Should be getting 120 vac. If there is 120 vac then check the flame sensor for continuity. It should read closed. If this checks ok then you will want to test the resistance of the gas coils to make sure that they are good. The resistances should be on the 3 terminal coils from terminal 1 to 2 1365 ohms, from 1 to 3 should be 560 ohms and on the 2 terminal should be 1220. If the coils and flame sensor check ok and the igniter is getting 120 vac then the igniter would be the issue. If the igniter is not getting proper voltage then you will want to access the timer from red to wb and there should be 120 vac. If there is not 120 vac then the timer would be the issue. If there is 120 vac then test the thermal fuse and the high limit for continuity. Replace if there is no continuity.
Answered by AppliancePartsPros.com | Friday, March 14, 2014