The dryer wont heat up no power going to heating elm/ and ck. thermostat and all the thermostats. How do I know if this power is bad?
ANSWER Hello John. You need to test and make sure there is 240 volts coming to the dryer at the terminal block and not at the outlet. If so, turn the unit on and test the relay on the power board and see if it is sending 120 volts down to the heater. If not, replace the control board W10111606. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Thursday, May 03, 2012