24/7 Customer Support

:

Customer Questions and Answers for Filter-Plt by Whirlpool

  1. Our Price $14.19
    Compare At $16.89
    You Save $2.70
    • Part Number: AP4429782
    • MFG Part Number: W10166788
    • Made by: Whirlpool
    Add to Cart

Questions & Answers

For Whirlpool Filter-Plt (Part Number: AP4429782)

Answer or Comment

View all Questions


Senad for Model Number MAYTAG MDB8600AWW

ANSWER Senad, I beleive you mean the filter W10192799 . But either way, you'll need an assortment of "torx" tips or drivers. here's how to do this : Removal 1. Disconnect power to the machine. 2. Remove racks.3. Remove Wash Manifold 4. Loosen Wash Arm Hub and Pivot. 5. Remove Spray Arm. 6. Remove 3 Torx™ screws securing Filter Guard. 7. Entire Wash Motor Assembly can be lifted from Tub for further disassembly(but is not necessary). 8. Remove and replace Pump Gasket if necessary. 9. Disconnect wiring harness from Wash Motor Assembly. 10. Remove 6 Torx™ screws securing Discharge Housing. 11. Remove Torx™ screw securing Wash Impeller . See bottom side of motor for access hole to lock motor rotation while removing Torx™ screw. Insert screw river tip into access hole while removing screw. 12. Lift off Filter/Flowplate Assembly to access Chopper Plate. 13. Remove 3 Torx™ screws to remove Chopper Plate. 14. Lift off Chopper 15. Remove Chopper Sleeve by using Impeller as a wrench. Lock motor rotation using the access hole provided in back of motor. Reverse the procedure and test the unit for proper operation. Good Luck and Thanks 

Answered by AppliancePartsPros.com   |   Monday, August 29, 2011

We are Safe, Secure, Dependable and Trusted
  • BizRate.com Customer Certified Site - Click to Verify