Hi, I have been getting an LF code for months on my washer, have checked the hoses, connections. I don't want to pay someone to fix this if I can fix it myself. The repair guy we talked to says it is either the flowmeter or something else pressure switch maybe? Is there anyway to be certain one of these is the issue?
ANSWER Hello Sandy. LF is for long fill. Check and see if the cold and hot water flows good into the unit, and make sure the drain hose is not siphoning the water out into the drain pipe. Only about 6" of drain hose should be inside the pipe. If all is good, and the machine fills with water properly and does not overfill, then the flow switch W10110225 is the most likely cause. These are not hard to replace. Just remove the top of the washer and you will see it inline with the water valve. Release the clamps and install the new switch. Make sure the large round part is facing down toward the floor and is not sideways. Hope this helps.
Answered by AppliancePartsPros.com | Monday, March 05, 2012