Replaced the fan motor and main control board, voltage is good. Fan will not come on.
ANSWER Hello Jac5839. You need to check and see if the neutral is dropping going to the fan motor and if so, you will need to trace and see where you are loosing the neutral at. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Wednesday, August 08, 2012