Dryer lights. Flame stays lite for about a minute then goes out. Ignitor goes back on but, flame does not restart. No smell of gas.
ANSWER Hello Garry. You will need to test the thermostats and the flame sensor and make sure they are good. They should read closed for continuity. Also, check the igniter and make sure it is getting hot enough to light the gas. If all is good on the unit, you will need to replace the gas valve 31001485. Here is a link on how to use a multi-meter for the testing procedures. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Tuesday, June 12, 2012