How do I replace the window door gasket item # 19, ( part # AP4098807 ). It is dried out in a few place and is cracked. is it hard to replace
ANSWER Bob, To do the repair properly, you'll need to dismantle the remove and dismantle the oven door. "1. Open oven door and grasp door on both sides. 2. Lift up and off the hinge receivers. 3. Reverse procedure to reinstall oven door. You'll need to remove the perimeter screws from the top and bottom of the door panel. NOTE: Proceed with the following steps for door handle and inner door disassembly. Remove screws securing top door handle trim to oven door chassis. Remove screws securing door handle brackets to inner door panel. Lift upward on the lower side of the door handle to release side alignment screws and rotate towards the top of the oven door to release and remove.
Remove screws securing door handle to door handle brackets. NOTE: Proceed with the following steps for inner door disassembly. Remove screws securing lower door glass retainer to door baffle and remove. Slide inner door glass downward to release from upper door glass retainers and remove. Remove screws securing door baffle to door lining and remove. Remove insulation from oven door. Lift inner glass and glass frame from oven door. Reverse procedure to reassemble oven door."
Answered by AppliancePartsPros.com | Thursday, August 16, 2012