Does this harns wire snap into the side wall of the freezer? Before yanking the wiring, would like to know if I need to remove the white plastic sidewall too.
ANSWER Rob, No, this harness does not "snap into the side wall of the freezer". it will be located behind the rear "metal" wall of the freezer compartment 4388356.You'll need to remove everything in the freezer compartment. Remove the automatic ice
maker. Remove the ice dispenser motor box. Remove the hex-head screw securing the air supply cover to the right side of the
freezer compartment. Remove the nine (9) screws securing the rear cover from the back wall of the freezer compartment.
NOTE: It may be necessary to remove the shelving brackets before the rear cover is removed. Carefully pull one side of the rear cover forward and remove the cover from the freezer. The evaporator, evaporator fan, defrost bi-metal and defrost heater are located behind the evaporator cover. Remove the rear cover. (See procedure above.) Remove the eight (8) screws securing the evaporator cover in the freezer section. Pull the evaporator cover up and out of the unit. You should now have access to the wire harness and all the components.
Answered by AppliancePartsPros.com | Tuesday, July 31, 2012