My Maytag dryer is not heating and reading 240v at power cord. Is there a thermal switch and where it is location?
ANSWER Hello Coupon Eddie. Check and make sure you have 240 volts coming to the dryer at the terminal block. Also, check the heater 34001073 and thermal fuses 35001021 35001022 and see if they are good. You can test these with a multi-meter TJMA-DM1. They should read closed for continuity. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Thursday, April 21, 2011