Kenmore Elite Ultra Wash dishwasher - stalled at 52 min in cycle and ran for over an hour. Replaced control panel and now appears to complete a cycle, but clean led is blinking and can only be restarted after hitting reset sequence. Dishes are wet.
ANSWER Hello John. Either the thermostat or the heater is bad and will need to be replaced on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Friday, July 26, 2013