24/7 Customer Support

:

Customer Questions and Answers for Oven Door Hinge by Whirlpool

  1. Our Price $27.59
    Compare At $40.37
    You Save $12.78
    • Part Number: AP4101300
    • MFG Part Number: 74011141
    • Made by: Whirlpool
    Add to Cart

Questions & Answers

For Whirlpool Oven Door Hinge (Part Number: AP4101300)

Answer or Comment

View all Questions

I want to replace both hinge assemblies.can I buy a LEFT and RIGHT assembly and does the entire oven interior have to be removed to replace the hinge assemblies? Also is the hinge mounting screw or bolt come with the assembly?

Anthony P for Model Number MGR5750ADW

ANSWER Anthony, Both the hinges are the same, so you will need to order 2 74011141 , not a left and right hinge. First, remove power to the range. You will need to remove the oven door, Open the door to the broil stop grasp the door on both sides and lift up and slide the door off the hinge assembly. You will then need to remove the cooktop burners(label the burner location first, twist the burner 90 dgs. counterclockwise and raise up on the burner, label and disconnect the igniter wires. Remove the two phillips head screws holding the burner bracket to the underside of the cooktop, then lift up on the front corner(s) of the cooktop and raise and remove the cooktop. Remove the three screws holding the side panel to the frame and lift up on the side panel until the "key hole" retainer disengages from the bottom of the frame, and set the side panel aside. You will have access to the hinge, remove the hex head screws from the front flnge of the oven and remove the hinge. Thanks and Good Luck 

Answered by AppliancePartsPros.com   |   Wednesday, October 05, 2011

We are Safe, Secure, Dependable and Trusted
  • BizRate.com Customer Certified Site - Click to Verify