Thank You for your answer on model 106-56166500. I took my multimeter and tested the plug that goes into the inlet valve. I only got 4.5 or so HZV's so I tested the plug that goes on the door's water and I only got about 8.5 or so HZV's. the water comes out good from the door. So am a little confuse on if I should order the inlet valve or the icemaker I also tested the line by blowing in it and air came out so the line isn't frozen. I just don't want to order the wrong part and have to return it. Thank's again for all your HELP!!!
The fast response to my first Question was SUPER FAST. BEST TOM
ANSWER Hello Tom. The voltage to the valve will only be for a few seconds during the cycle. If the voltage was there, you will need to replace the water valve. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Wednesday, February 22, 2012