I understand how to test the valve with a multimeter but is there a a way to meter the igniter to see if it is the problem. Since there are two of them, it would make me feel better to know one of the igniters was bad or the valve was bad rather than know the valve is good but not which igniter to replace. Thanks for any help.
ANSWER Hello Barry. According to the manufacture the igniter 9753108 should read 85 to 95 ohms. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Tuesday, August 14, 2012