I'd like to know how to get to the 'infinite switch' on my Kitchen Aid top burner(part # W10307362). How do I get take the panel with nobs off to access the electrical parts?
ANSWER Hello Cynthia. 1. Unplug range or disconnect power.
2. Pull the range forward far enough to access
the end cap screws.
3. To remove the control panel:
a) Remove the screw from each end cap. b) Open the oven door and remove the
three screws from the bottom of the
control panel. c) Lift the front of the control panel, pull it
forward, and slide the front edge of the
cooktop glass out of the slot in the front
of the panel.
d) Rotate the control panel up and over so
the bottom side faces up. 4. To remove an infinite switch:
a) Pull the knob off the switch you wish to
service and remove the nut and fiber
flat washer. b) Remove the wires from the infinite
switch terminals and remove the switch.
NOTE: The terminal callouts are shown
on the next page.
Answered by AppliancePartsPros.com | Friday, February 15, 2013