Everything works except broiler. Igniter glows but burner does not light?
ANSWER Hello Kevin,
You may want to check the igniter before the valve. The igniter 74007498 has to reach a certain temperature to turn open the gas valve. I would first ohm out the igniter. The ohm reading should be between 50-400 ohms at 75 degrees. Amp draw should be between 3.2 and 3.6 amps when turned on and the voltage should be 120 vac. If you are not getting at least 3.2 amps or do not fall in the correct ohm range then replace igniter.
Answered by AppliancePartsPros.com | Thursday, November 08, 2012