i have found that my switch asm is faulty(AP3968085)but my question is how do i access it to replace it or which is the quickes way that you recommend,thank you for your time pls help!
ANSWER Guillermo, Here are the instructions " 1. Unplug washer or disconnect power. 2. Turn off the water supply to the washer. 3. Remove the top cover and the console. 4. Remove the lower front access panel . 5. Open the washer door.6. Using a small screwdriver or a pair of
long-nosed pliers, pull the tension spring on the retaining wire out from around the front of the bellows, and remove the wire. 7. To remove the door switch assembly: a) Pull the bellows off the lip of the front panel beside the door switch assembly just enough to access the switch assembly. b) Remove the two T-20 Torx screws from the door switch assembly. c) Pull the door switch assembly out and turn it over so that you can access the connectors. d) Unlock the tabs and disconnect the three wire connectors from the door switch terminals, then remove the assembly." Good Luck and Thanks
Answered by AppliancePartsPros.com | Wednesday, December 21, 2011