Washer filled up, washed but not will drain and spin. Tub is full of water.
If the problem is a lid switch, is it too difficult to install it?
ANSWER Hello Leonid. These are not to hard to install. You will need to unplug the washer. Then remove the two end cap covers by unsnapping them off the control panel. Once removed, you will need to remove the screws holding the control panel in place. Then pull forward on the control panel and flip the control panel backward to access the lid switch connection and the clips for the cabinet. Unplug the lid switch connection. There are two gold colored clips the will need to be removed by unsnapping them from the cabinet. Then the cabinet will pull off the frame to install the lid switch. Reinstall in reverse order. Hope this helps.
Answered by AppliancePartsPros.com | Monday, May 02, 2011