Washer goes through the spin cycle but does not empty the water and stops there.
ANSWER Hello Rudy. You will need to check and see idf the lid switch 12001187 is bad if the unit does not drain or spin. It should read closed with the lid closed. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Friday, September 30, 2011