Hi I have just purchased the oven sensor and now the oven reads F3 E2 then turns off. And only the broil burner turns on, not the bake. What else can I do?
Jose C. for Model Number RF368LXPB
ANSWER Hello Jose. If you replaced the oven sensor and the code continues, you will need to replace the control board 6610456. First test and make sure the thermal fuse 3196548 is good. It should read closed for continuity. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps.http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Monday, August 01, 2011