Lower Bake Element does not get hot. I measured 27+ Ohms at the element and measured voltage going to it. ??????
ANSWER Hello Jim. If you tested at the element, and there was 240 volts there, then you need to order and replace the element. If there was low voltage, then the control is most likely the issue with the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Friday, March 08, 2013