Hello, My oven will not bake or broil. The display reads 100 but never changes. I hear the relay click but that is it. I smell no gas coming out. The top burners work just fine. I was not sure If I needed this part as it maybe not drawing enough current to trigger valve or if the top display unit is the problem?
ANSWER Hello Cory. Test for 3.2-3.6 volts AC at the gas safety valve with the igniter turned on. If the voltage is there, you have a bad safety valve. If the voltage is low, you have a weak igniter and the igniter will need to be replaced. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Wednesday, August 22, 2012