Oven starts to heat then starts beeping and reads F3 E0.
ANSWER Hello Judy. Based on the error code, the sensor W10181986 is bad. Check the wiring for the sensor and see if the sensor reads 1100 ohms at room temperature. If not, replace the sensor. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Saturday, December 15, 2012