Everytime I tightened the bolt for the spinner pulley, the tub gets tight and it does not spin freely. I loosen the bolt and it is still tight. I took out the bolt and remoned the spinner pulley and turn the tub by hand and still tight. When I pound the shaft where the bolt screw in with a rubber mallet and spin it with my hand and it spins freely. When I put the spinner pulley back and tighten the bolt just enough so that the pulley doesn't have any play and tub gets tight again. Although I loosened up the bolt in order for it to spin freely again. By removing the pulley and pound on the shaft again then it moves freely. Is there something missing?
ANSWER Hello Dado. Based on the information you provided, it sounds like the bearings are bad and will need to be replaced. You will need to replace the outer tub assembly 22004465. Hope this helps.
Answered by AppliancePartsPros.com | Monday, July 11, 2011