My washmachine pump has magnets in the pump set-up with power to it . How do I determin the pump is bad or not geting the power needed to operate . Maqchine does not drain .
ANSWER Hello Todd. You will test for power to the pump in the unit. If there is power there and the pump does run, replace the pump. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Monday, February 25, 2013