Note: This question is for the older version of this part, but we thought you might still find it helpful
Manual says to quarter turn the glass cover, I tried everything including a strap wrench and still unable to twist off.
Re: your reply to the same problem indicates to " Yes, if the glass does not unscrew from the assembly, you will need to remove the assembly AP3029430 from the unit to install the bulb AP3607217 " Is the removal from the back of the range rather than the oven ?
ANSWER Ron, Yes, You would have to remove the assembly from the cavity on the backside of the range. You'll need to be careful, so you don't damage the porcelain oven liner, and you'll need a flat blade screwdriver. Unplug the power cord, remove the rear cover panel, and disconnect the wires from the receptacle, Using the screwdriver, press in/down on the two spring clip retainers on the housing and push the assembly in towards the oven . Reverse the procedure to install the replacement assembly. Thanks and good Luck
Answered by AppliancePartsPros.com | Saturday, January 14, 2012