What causes ice cubes continuous to come out through the ice chute after pushing the actuator in the ice dispenser.
ANSWER Rudy, A couple of things you'll need to check, The actuator/limit switch R0163305 could be faulty. the delay mechanism C8973602 or the ice dispenser paddle itself 12002642. You'll need to remove the dispenser facade and investigate, here's some help " 1. Apply masking tape to blade of putty knife or screwdriver. Use masked tool to remove plastic Crush/Cube selector button from dispenser-cavity
escutcheon. 2. Use masked tool to pry bottom edge of escutcheon up, away from door. Pull remaining three sides of escutcheon up, away from door and set escutcheon aside. 3. Remove two screws that anchor electrical bracket cover. Separate cover and bracket to access ice, water and cavity-light switches. 4. Remove two screws and clips that anchor water actuator arm and return spring. NOTE: In reassembly, return spring straddles arm and rides up against top section of arm. 5. If you want to replace the water tube, remove watertube retainer clip. Pull water tube out of door and thread new tube through. 6. Remove four screws and clips from ice door.
Remove ice door delay-retainer screw and retainer. Remove ice door and delay mechanism." Good Luck and Thanks
Answered by AppliancePartsPros.com | Monday, January 02, 2012