I ran the self-cleaning and then the fan would not shut off. (The oven did heat up, just the fan would not shut off.) We replaced the thermal fuse and it didn't help.
Had a tech come out and he said the board was bad. Found a guy on Craigslist who said he could solder and fix the board. After he left, both the lower and upper oven would not heat and the fan ran continuously. Sent the board in to fixyourboard.com and installed it. Now the fan is fixed because it only comes on when the oven is trying to heat but, still none of the elements heat in any mode.
The supressor is not in the oven because I was told that I could test it without it. Any ideas on all this?
ANSWER Hello Robin,
Yes the unit can be tested without the suppressor on it. You may want to check the thermal fuses to ensure that they are not bad. You would check them for continuity. If they are bad you would need to replace them. If they are not bad then you would need to replaced the control board. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Friday, November 23, 2012